How To Adjust Computer Screen Size On Tv

Resizing your desktop to fit the screen

Many Idiot box and HDTV displays overscan (overstate) the video image in lodge to hide possible artifacts that might appear on the edges of the pic, such as text and station logos on Idiot box programming.

When viewing other content that does non need overscan, such equally games or the Windows desktop, some of the image might be cut off. For instance, the Windows taskbar may announced off-screen and not exist completely visible.

This page provides guidelines for compensating for overscan so that all content is visible on the screen.

Using the Display Controls

When you are using the PC as a source, yous can achieve the best results by using the control settings provided past your display manufacturer to turn off overscan.

These controls are identified differently, depending on the manufacturer. Utilize the following guidelines to aid you identify the correct controls and employ the proper setting:

Locate and Adjust Typical Controls

Either on the remote control or from the picture section of the user menu, await for a setting called "Picture show", "P. Mode", "Aspect", or "Format".
Gear up it to "i:1", "Just Browse", "Full Pixel", "Unscaled", or "Screen Fit".
If this does non work, or if you lot cannot detect the controls, run across the next section.

Cheque for Advanced Settings

From the moving picture section of the user menu, wait for a setting called "HD Size" or "Brandish Area".

The setting may be within a sub-menu or Advanced menu.
Change the setting options to see which gives the all-time results.
After changing the setting, you may need to adjust the settings fabricated in the previous section.
If you however cannot attain the results yous want, run across the side by side section.

Specify the Input Way

On some displays there is an input fashion setting or label that defines the display connection, regardless of the type of cablevision continued to the display.

Look for the input mode setting or label and select - or in some cases enter - either "PC", "HDMI", or "DVI" for the input fashion.
After changing the setting, y'all may need to arrange the settings fabricated in the previous sections.

Adjust other components if needed

If y'all are using a receiver or video processor between the PC and the display, y'all may as well need to configure these components.

Note: Refer to your display or equipment's user guide for more details on how to adapt these settings.

Verifying the Adjustment

When changing the setting, wait for the border of the desktop to line upwards exactly with, or just inside, the edge of the viewable area of the display. All edges of the taskbar, for example, should be completely visible.

Using the NVIDIA Control Panel

The NVIDIA Control Console tin be used to compensate for overscan by resizing the desktop. This method should be used only if the brandish setting needs to be fine-tuned after you take inverse the overscan setting using the controls on the brandish, or if the display does not have controls to adjust the overscan.

See How to resize my desktop for instructions.